This product is a concentrated balanced boiler compound for treatment of steam boiler water. It is ideally suited for food plants and other industrial use. Test hardness of feed water. Hardness should not be higher than 200 ppm. If hardness exceeds 200 ppm, a separate softening procedure should be implemented. Estimate the amount of water in boiler. As a recommended initial treatment, add 1 gallon of product to each 200 gallons of water in the system. It is estimated that approximately 1 gallon of compound needs to be added to 500 gallons of make up water. This, however, will depend on the daily test results of the boiler water. The daily analysis of the boiler water should include alkalinity, pH and phosphate tests. Periodic analysis should also be done on the alkalinity of the feed water. p-alkalinity should be in the range of 200-400 ppm. m-alkalinity should be in the range of 400-800 ppm. pH should be in the range of 10-12. Phosphates (PO4) should be in the range of 30-50 ppm. Sulfite should be in the range of 20-40 ppm.

1 drop = 2, 5, 20 or 50 ppm as Mo

Each kit is packaged in a durable plastic case, is color coded with matching instructions and pictures and includes all items to complete approximately 60-75 tests.  Each reagent dropper bottle has a calibrated tip to ensure a consistent test each time.

1 drop = 0.7ppm as HEDP / 10 mL
1 drop = 2 ppm as PBTC / 10 mL

This modified phosphonate test kit compensates for high-alkaline waters and possible fluoride interferences. This kit includes an acid reagent and pH paper to adjust the sample to the correct 2.8 pH and a fluoride suppressor reagent.

Each kit is packaged in a durable plastic case, is color coded with matching instructions and pictures and includes all items to complete approximately 60-75 tests.  Each reagent dropper bottle has a calibrated tip to ensure a consistent test each time.

1 drop = 10 or 50 ppm as CaCO3/25mL

Each kit is packaged in a durable plastic case, is color coded with matching instructions and pictures and includes all items to complete approximately 60-75 tests. Each reagent dropper bottle has a calibrated tip to ensure a consistent test each time.

1 drop = 50 ppm as NaNO2/5mL Typical applications include closed system corrosion protection using sodium nitrite as an oxygen scavenger chemical. Elimination of oxygen in water helps to protect the system from forming iron oxides AKA rust. Each kit is packaged in a durable plastic case, is color coded with matching instructions and pictures and includes all items to complete approximately 60-75 tests. Each reagent dropper bottle has a calibrated tip to ensure a consistent test each time.

1 drop = 2 or 10 ppm as Na2SO3/ 25mL Sulfites are used to remove dissolved oxygen from the treatment water. Excess sulfite at elevated temperature combines with oxygen to reduce pitting. Remember to cool your samples quickly and perform the test immediately. Each kit is packaged in a durable plastic case, is color coded with matching instructions and pictures and includes all items to complete approximately 60-75 tests. Each reagent dropper bottle has a calibrated tip to ensure a consistent test each time.

A balanced treatment containing nitrites for hot water boilers and closed systems.

Concentrated sodium sulphite solution designed to be used as an oxygen scavenger in steam boilers. It is a stable solution and being a liquid, there are no dissolving or plugging problems.

This product is designed to provide scale and corrosion protection for closed chilled-loop, hot water and steam systems. It provides excellent corrosion protection even at elevated temperatures by establishing a protective film within the system. When used in steam boiler applications, this product should be used in conjunction with No. 45 Corrosion Inhibitor in order to provide corrosion protection for the entire system including steam lines.

This product will protect against rust, pitting and corrosion in steam and steam condensate lines. It contains a blend of corrosion inhibitors primarily based on neutralizing amines. It is ideally suited for food plants and other industrial use.

This product is a concentrated corrosion and scale preventative compound for cooling towers and condenser feed water. It is ideally suited for use in open recirculating cooling towers. It contains anti scaling agents, cathodic and anodic inhibitors and will prevent corrosion of both steel and soft metals. It allows high cycles of concentration by controlling alkalinity.

This product is a specially balanced treatment providing protection against scaling and corrosion. It contains oxygen reactants, dispersants, active inhibitors and polymers. It is ideally suited for food plants and other industrial use.